CUSTOMER SERVICE * SALES * TECHNICAL SUPPORT

DELIVERIES WORLDWIDE

PERFORMANCE GUARANTEE

Telephone   (804) 318-3686 Toll Free US  (866) 244 1578 Fax         (703) 991-7133 Hours    8 AM - 6 PM EST INTERNATIONAL & DOMESTIC SALES

MANUFACTURING DISTRIBUTION TECHNICAL SERVICES ​FOR ANALYTICAL INSTRUMENTATION

TELEPHONE (804) 318-3686 TOLL FREE  (866) 244-1578

EQUIPMENT FOR QUALITY CONTROL AND R&D  INLINE POWDER SAMPLERS "The general consensus is that only sampling from a bulk powder while it is in motion can yield the desired representative sample."

COMPLETE INTERACTIVE SAMPLER CATALOGUE PDF DOWNLOAD

FREEGLIDE JAM PROOF SAMPLERS AUTOMATIC / PNEUMATIC OR MANUAL

The FreegIide Inline Samplers are specially designed and engineered so that powder is kept out of the bearings by a special flexible membrane. This means the sampler will not jam.

The sample is collected in a cup and so is not physically altered by the sampling process. When the sampling cup is retracted the full bore of the down pipe is available for powder flow. Made from FDA acceptable materials and easy to strip down for cleaning

SMARTGLIDE INLINE SAMPLERS AUTOMATIC / PNEUMATIC OR MANUAL

The SmartGlide is specially developed for sampling dusts, powders and granulates in downpipes. 

The sampler is used for freeflowing solids with particle sizes between 1 nm and 10 mm, and is characterized by its uncomplicated installation and reliable functionality. 

The samples are representative and reproducible. In the pneumatic version and with appropriate control, time-, volume- or event-proportional sampling can be realized. Only suitable for free-flowing, free-flowing bulk materials with grain sizes between 1 nm and 10 mm.

​MATERIALS OF CONSTRUCTION

Contact parts:     - 316 stainless steel                  - PTFE                  - Silicone rubber, Viton or EPDM                  - Other materials on request

Non contact parts: - 304 grade stainless steel                  - Other materials as required.

AUTOMATED PNEUMATIC SAMPLER

SMARTGLIDE SAMPLER Operation A cup attached to a piston rod is led into the falling stream for sampling and filled with the sample. During or after withdrawal into the sampler housing, the cup is tilted and the sample falls out of the ejection nozzle

MANUALLY OPERATED SAMPLER

The supplied TC flange DN80 or DN125 is welded into the wall of the pipe or chute according. The sampler is attached to it with a triclamp. Optionally, a sample collection system (bottle adaptor or bag holder) is connected to the outlet.

WHITESTONE VA TEL (804) 318-3686 FAX (703) 991-7133 INFORMATION@QCLABEQUIPMENT.COM  WWW.QCLABEQUIPMENT.COM Copyright 2012: QAQC Lab | Particle Measurement System | All rights reserved. 804-318-3686 |  sales@qclabequipment.com