CUSTOMER SERVICE * SALES * TECHNICAL SUPPORT

DELIVERIES WORLDWIDE

PERFORMANCE GUARANTEE

Telephone   (804) 318-3686 Toll Free US  (866) 244 1578 Fax          (703) 991-7133 Hours    8 AM - 6 PM EST INTERNATIONAL & DOMESTIC SALES

www.qclabequipment.com

MANUFACTURING DISTRIBUTION TECHNICAL SERVICES ​FOR ANALYTICAL INSTRUMENTATION

TELEPHONE (804) 318-3686 TOLL FREE  (866) 244-1578

EQUIPMENT FOR QUALITY CONTROL AND R&D 

SUBMARINE SAMPLERS FOR LIQUIDS

ONLINE PRICING

SUBMARINE SAMPLER PRO The Best Selling Heavy Duty Liquid Sampler

STORE SEARCH

COMPLETE INTERACTIVE SAMPLER CATALOGUE PDF DOWNLOAD

AVAILABLE IN STAINLESS STEEL & PTFE

The Sub Sampler Pro  (some times called a ‘Bomb Sampler’) is used throughout the world for both chemical and environmental sampling. 

Its unique double action means  it can sample from a set distance from the bottom of a container or alternatively at a mid-point. BROCHURE

A. Sampling from the bottom of a container - Use a Lowering Cable

The Sub Sampler Pro is lowered until the plunger assembly touches the bottom of the container. 

As the plunger assembly is pushed up, the sample is able to enter the device. When the sampler is raised, the plunger will drop down, and seal the sampler. Hand reels and cables are essential accessories when using sub samplers (Bomb Samplers). The standard heavy duty hand reel is suitable for most situations. 

However if you are using the sampler in an Ex rated environment use the Hand Reel Ex with the copper cables.

Do not use stainless steel chain for use in ATEX environments. B. Mid-height Sampling - Use a Lowering Cable and a Control Line

Lower the Sub Sampler Pro into the liquid. 

At the required sampling depth pull on the control line  to raise the plunger. This will allow the liquid to enter the sampler. Release the control line and  the plunger will drop down and seal the sampler. SPECIFICATION SHEETS SUB SAMPLER PRO

675 5072B500      500 ml          316 Stainless steel                63 mm x 280 mm              No 675 5072P500     500 ml           PTFE REELS Part No. Description

675 5070W01  Standard Heavy Duty Plastic Hand Reel 

675 5070D05  Ex Hand Reel - for Ex use rated environments. Made from conductive plastic.             Supplied with earthing leads and clip. Use with copper cable 

 * Make sure the sampler is properly earthed (grounded) use the Ex Hand Reel (675 50700-05) and Copper cable (675 5070C) CABLES

Part No.       Description 

675 5070S10      Chain - 316 stainless steel - 10m

675 5070S25      Chain - 316 stainless steel - 25m

675 5070S50      Chain - 316 stainless steel - 50m

675 5070D10    PTFE coated stainless wire - 10m 

675 5070D25    PTFE coated stainless wire - 25m 

675 5070D50    PTFE coated stainless wire - 50m

Part No.         Description

675 5070P10  Polypropylene - braided cord - 10m 

675 5070P25  Polypropylene - braided cord - 25m

675 5070P50  Polypropylene - braided cord - 50m

675 5070C10  Copper braided cable - 10m 

675 5070C25  Copper braided cable - 25m 

675 5070C50  Copper braided cable - 50m

WHITESTONE VA TEL (804) 318-3686 FAX (703) 991-7133 INFORMATION@QCLABEQUIPMENT.COM  WWW.QCLABEQUIPMENT.COM Copyright 2012: QAQC Lab | Particle Measurement System | All rights reserved. 804-318-3686 |  sales@qclabequipment.com