Telephone  (804) 318-3686 Toll Free US (866) 244 1578 Fax         (703) 991-7133 Hours    8 AM - 6 PM EST INTERNATIONAL & DOMESTIC SALES

DELIVERIES WORLDWIDE

PERFORMANCE GUARANTEE

MANUFACTURING DISTRIBUTION TECHNICAL SERVICES ​FOR ANALYTICAL INSTRUMENTATION

TELEPHONE (804) 318-3686 TOLL FREE  (866) 244-1578

EQUIPMENT FOR QUALITY CONTROL AND R&D  SINAR DRYPRO INLINE MOISTURE & TEMPERATURE MONITORING     (SUITABLE FOR FREE FLOWING HYGROSCOPIC MATERIALS)

ONLINE PRICING

BROCHURE QUICK QUOTE

COMPLETE INTERACTIVE SAMPLER CATALOGUE PDF DOWNLOAD

The Drypro™ is a mains powered single or multi sensor moisture measuring system.  There are only three operator modes, which make the Drypro™ quick to learn and easy to use. Once set up, the Drypro™ can give sequential moisture and temperature readings from each sensor installed.

Your Drypro™ is supplied with seven crop calibrations as standard, but can store up to a maximum of twenty-five. Contact QAQC LAB if your calibration requirements change.

​AVAILABLE WITH 4- 20 ma, or 2-10 V DC OUTPUT FOR CONTROL AUTOMATION OR DATA LOGGING. (DATA ACQUISITION MODULE AVAILABLE), OR WITH RS 232 OUTPUT WITH TIME, DATE, MOISTURE, AND TEMPERATURE INFORMATION OUTPUT VIA MLOG SOFTWARE. DRYPRO CONTROL PANEL BOX 620 7080

• SEQUENTIAL SENSOR OUTPUT FOR BATCH TYPE DRYERS

• PROVIDES TEMPERATURE & MOISTURE OUTPUT

• AVAILABLE FLOW REGULATOR

      FOR CONTINUOUS SYSTEMS

• MINIMIZE FUEL WASTE

COMPATIBLE PROBE TYPE PORTABLE ANALYZER CAN BE USED FOR CALIBRATION, OR FOR TESTING FOR SUITABLE SENSOR PLACEMENT LOCATIONS

FLAT SENSOR INSTALLED IN A GRAIN DRYER STANDARD PENDULUM  SENSOR  MAGNETIC MOUNT

TECHNICAL SPECIFICATIONS CONTROL PANEL TECHNICAL SPECIFICATIONS SENSORS

• Dimensions (mm): H300 x W 400 x D150

• Display Unit Weight: 8.0 KG

• Max. Number of Sensors: 4

• Max. recommended distance between display Unit and sensors: 

     100 Meters.

• Display Unit Construction: Mild steel, powder coated.

• Mounting: 4 off wall mounting lugs to suit M8 bolts.

• Operating Environment: 0 to +55ºC. 

• Storage Temperature: -20 ºC to +55 ºC; 

      Humidity to 95% non-condensing.

• Humidity: Up to 95% non-condensing.

• Display: Alphanumeric LCD, 2 x 20 characters.

• Processor: Intel 80C31 microprocessor.

• Memory: EPROM and RAM

• Calibrations supplied.

• (Upgradable via the RS232 port). 7

• Max. calibration capacity: 25

• Data Output Formats: RS232 C, ASCII code, 300 Baud.  

• Max recommended transmission  distance - 15m.RS485. 

• Max transmission distance – 2Km.

• Moisture Accuracy:± 0.5% dependant on application 

      and moisture level.

• Output Interval. Minimum (seconds). 4

• Temperature Accuracy: ± 1 ºC.

• Displayed Temperature: ºC or ºF

• Display Resolution: 1 Decimal place.

• Power Supply 80-240 V AC 50/60Hz 0.5 A

• Fuse Rating:

• FS1  250 V 20mm (F) Quick blow.      

• FS2  250 V 20mm (F) Quick blow.

• FS3  250 V 20mm (F) Quick blow.

• FS4  250 V 20mm (F) Quick blow.

• FS5  250 V 20mm (F) Quick blow.

• Temperature Correction:Temperature sensor mounted on fin. 

       Correction factor is software programmable.         Correction range 0-40 ºC.

• Sensor Dimensions (mm): 80 x 380

• Sensor Weight: 1.2 KG

• Operating Environment: 0 to +70 ºC. 

• Storage Temperature: -20 ºC to +70 ºC; 

      Humidity to 95% non-condensing.

• Humidity: Up to 95% non-condensing.

• Cable Length Supplied: 2 meters.

WHITESTONE VA TEL (804) 318-3686 FAX (703) 991-7133 INFORMATION@QCLABEQUIPMENT.COM  WWW.QCLABEQUIPMENT.COM ALL RIGHTS RESERVED QAQC

Copyright 2012: QAQC Lab | Particle Measurement System | All rights reserved. 804-318-3686 |  sales@qclabequipment.com